Forklift Training Schools Surrey

Forklift Training Schools Surrey - Forklift Training Schools - For The Safety Of Your Workers

If you are searching for a job as an operator of a forklift, our regulatory-compliant lift truck training Schools offer exceptional instruction in numerous types and styles of lift trucks, lessons on pre-shift inspection, fuel kinds and dealing with fuels, and safe use of a lift truck. Hands-on, practical training assists individuals participating in acquiring basic operational skills. Course content consists of current regulations governing the operation of forklifts. Our proven forklift courses are intended to offer training on these types of trucks: narrow isle forklift, counterbalanced forklift and powered pallet truck.

Do not lower or raise the fork while the lift truck is moving. A load should not extend above the backrest because of the danger of the load sliding back toward the operator. Check for overhead obstructions and make certain there is plenty of clearance prior to lifting a load. Stay away from overhead power lines. Once the load is lifted straight up, tilt it back slightly.

When the load is raised the lift truck will be less stable. Make certain that no pedestrians cross under the elevated fork. The operator must not leave the lift truck while the load is raised.

When handling pallets, forks must be level and high enough to go into the pallet and extend all the way under the load. The width of the forks should provide even distribution of weight.

Chock the wheels and set the brakes prior to loading and unloading the truck. The floors should be strong enough to support the weight of both the forklift and its load. Fixed jacks can be installed to be able to support a semi-trailer which is not coupled to a tractor. The height of the entrance door should clear the height of the forklift by at least 5 cm. Mark edges of rail cars, ramps or docks and avoid them.

Click to Download the pdf