Manlift Training Surrey - Different manlift training courses consist of the review and content of manlift devices. An important portion of the program is the practicum where students demonstrate their practical ability and knowledge to operate the manlift safely. A requirement to Manlift training is the fall protection training, that may be included in the training based on the particular requirements of the client.
The program content comprises: pre-shift machine check and work area survey requirements; the effect of doing unsafe acts or utilizing unsafe machines, Lifting device machine definitions, Review of load capabilities, the specific equipment requirements and safety decals, Review of related parts of the CSA Standards and the OHSA Standards and Review site specific Dangers, together with controls for safely utilizing a lifting device.
Demonstration and Evaluation Content
Demonstration and evaluation content consists of: Proper personal protective equipment or also known as P.P.E. as required; Making use of a signaler or a spotter when needed; Utilizing a lift just on level and solid ground; Utilizing a correct fitting harness or fall arrest device; Aware of load restrictions etc. and other specs set out by the manufacturer; Utilizing the lift with all other staff clear of the job site; Having all associated machinery safely stored on the lift platform; Pre-shift work area survey and machine check; Ensuring a smooth and safe operating speed for different plant conditions and isolating off the work place when major work projects are to be carried out.
Each person would be tested to make sure they can efficiently and safely use your site-specific equipment.
Manlifts can be really dangerous equipment because they are capable of lifting a worker 20' or higher in the air and that creates a particular amount of risk. As the danger is so apparent, lift operators and owners are careful to properly maintain their machinery and follow correct safety precautions and operating procedures. The ratio of accidents involving this particular equipment is fairly low.
The safe use of the boom lift, scissor lift and the manlift is up to the operator of that equipment. They must understand all of the responsibilities that go with operating the machine and how to use the lift vehicle safely. The most basic safety features on the equipment are the operating manual and safety decals. These show essential information regarding the operating procedures, safety machines and maintenance.
Newer lift models would come with manuals and decals in place. Technically, the operating manual must be stored on the lift itself. If you are buying a used lift, it is important to ensure that the handbook is included and that vital decals haven't been painted over. The restraints which prevent operators from falling and the guardrails are other important safety features. These are mandatory and standard on all kinds of lifts.